Silicone impregnating spray ATSKO 89ml

A highly effective product for providing water repellency to textiles and leather, based on silicone polymers. During drying, cross-linking of the polymers occurs. Thanks to its patented formula, the product is unique in that it does not affect the breathability of membrane textiles (Gore-TEX®, Sympatex®, etc.). Compared to competing products, it offers up to 30% longer durability and treatment effectiveness.

• A single spray is sufficient for full effect; repeated spraying is not recommended
• Tested on all textiles made from natural and synthetic fibers: nylon, polyester, blends, wool, etc. Also suitable for suede and brushed leather (nubuck). Does not affect the breathability of sandwich structures with Gore-Tex® and other membranes
• Improves breathability of clothing and footwear
• The water-repellent film is completely odorless after drying
• Only minimally affects the color of natural materials (testing recommended)
• The treated surface is resistant to the formation of salt stains and marks
• Restores and replaces the factory-applied silicone waterproofing of leather boots
• The spray uses 10 g of CO2 as propellant (the product leaves no carbon footprint)

INSTRUCTIONS FOR USE: Shake well before use. First, test on a small area to check for color change (evaluate after drying). The treated surface must be clean and dry. When applying, hold the can vertically with the nozzle upwards, 15–20 cm from the surface, and spray slowly until the material is evenly damp. One application is optimal. Use the treated product only after full drying and curing (polymerization) of the product.

Note: Low temperature, high humidity, or reduced air circulation may extend drying and curing time up to 48 hours.

DANGER: Contains hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclic, <2% aromatic. Extremely flammable aerosol. Pressurized container – may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. If medical help is needed, keep the container or label at hand. Keep out of reach of children. Protect from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Do not spray on open flame or other ignition sources. Do not pierce or burn, even after use. Avoid inhaling aerosol. Use only outdoors or in well-ventilated areas. Wear protective goggles/face shield.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If you feel unwell, call a doctor. If eye irritation persists, seek medical attention. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Dispose of contents/container at a hazardous waste collection site.